Produce rail and stile door frames for cabinet doors. These bits don't need to be taken apart, reversed, or have parts swapped.  Just raise and lower bit in your router table to change cuts. Or make it even easier by using a 3/8″ thick sled to raise the material to the correct height for a perfect match. Rail end is cut face up and the edge is cut face down. For 3/4″ material.  Carbide tipped.

  • 1-7/16″ Cut Length
  • 1-5/8″ Diameter (exc. 891.521.11)
  • 1/4″ x 3/8″ Slot (exc. WL-1365-5.5)
  • 7/16″ x 3/8″ Profile


WL-1337 Classic Ogee, Woodline.USA

RAIL & STILE 1pc ROUTER BITS

$85.00 $194.00

QUESTIONS & ANSWERS

Ask a Question
  • Do you have dimensions on the WL-1368 Wedge, showing the angle of the taper and the depth,. etc.?

    Total cut length is 1-7/16", Bevel is 30°, Profile is 7/16" x 3/8", Slot is 1/4" x 3/8".

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Doyle M.
Easy and convenient to use

I currently have several of these router bits from Woodline which I have acquired over the past years. I used this one to build an arched raised panel from hard maple to connect the kitchen cabinets over the sink in my moms house. The profile of this router bit matched the doors of the current cabinets and allowed me to cut both the rails and stiles without having to remove and reinstall different bits. You cut the first profile then easily raise the bit to cut the other. I have made countless number of raised panels over the years with these bits and they continue to preform very well, just keep them clean.

G
Gary Stoh
Great 1-Piece Router Bit

I have had this bit for some time now and finally decided to use it on a new project. Figuring out how to set it up took while but once I did it works extremely well. I highly recommend using a 3/8 inch thick coping sled because it eliminated changing the bit height. Rockler sells a good one and the plastic shield rides against the fence and protects the sled from the bit. I did the cuts in 3 passes, adjusting the fence until the bearing was flush with the fence. It still goes quickly and produced clean cuts.


Share this Product


More from this collection

Woodline manufactures and sells only quality carbide tipped and solid carbide router bits backed by a LIFETIME WARRANTY.

Need a gift idea for your favorite woodworker?

Gift Cards from Woodline are perfect!

Woodline Gift Card

GET OUR LATEST CATALOG: