This is not a straight edge guide, but a rail system that allows you to mount any circular saw onto the adapter plate for perfectly straight cuts with no kickbacks or offset calculations. Makes quick work of breaking down sheets goods. The saw rides on the aluminum extruded patent-pending track, and the matching grooves of the adapter plate mesh perfectly, eliminating side-to-side play while allowing easy forward and reverse movement. Components break down easily for storage or transport to job site. Router attachment now available for the True Trac™ System. Optional extension kits to take your capability to 100" or beyond.





Why Buy a True Trac System?

Our Customers have found that the True Trac System consistently exceeds their expectations of quality, accuracy, ease of use, and overall versatility.
Quality and Accuracy - The standards we hold our extruders to guarantees that every piece of track is flat, dimensionally accurate, and compatible with every other piece we produce - The newest run matches the initial test run, and we test every run before it leaves the shop to assure ourselves of that consistency.
Ease of Use - When compared to guide clamps or shop made straight edges, the True Trac is just plain easier to use. There are no offset measurements, no worries about drifting away from the guide, and no chip-out with our zero clearance anti-chip inserts.
Versatility - Your True Trac system makes breaking down sheetgoods a one person job, but it can also help you make cabinet filler strips, trim the bottom edge off of a door, finish off that last piece of hardwood flooring, or trim the edge off of a 20 ft long granite counter top for a custom kitchen installation!
 
What sets the True Trac apart?
 
The True Trac combines a uniquely designed aluminum extrusion and a matching universal adapter plate that allows you to use any circular saw. This design positions your saw on top of the track, not against it, and allows for zero play between the Adapter Plate and the track, giving you complete control of your saw. The edge of the track features a polyvinyl strip, which you will trim with your first use, but from then on this will mark the exact cut position of your blade -- no offset measuring from the blade to saw base required! The polyvinyl strip also provides zero clearance for a clean, chip-free cut, combined with a non-slip bottom surface to keep the track in place while you cut! The unique design that is built into the True Trac guarantees an accurate and easy cut every time, and sets it apart from the competition.
 
Common True Trac Uses:
  • Breakdown 4' x 8' sheet goods
  • Crosscut single or multiple boards at one time
  • Rip narrow boards (like with a table saw)
  • Bevel the edges of sheet good or individual boards
  • Shave thin strips off workpiece edges to produce boards of precise widths
  • Cut tapered shapes for cabinet fillers and similar projects
  • Straight edge rip of irregular edges
4' Kit includes::
  • One (1) 57 inch track
  • Two (2) 57 inch length anti-chip strips, installed on track
  • One (1) Universal Saw Adapter Plate
  • One (1) setup jig
  • One (1) hardware packet (6 bolts, 6 nuts, 1 L-shaped hex wrench)
  • One (1) anti-chip carrier
  • Two (2) 6 inch length anti-chip strips, for carrier
  • Hard copy of installation instructions

8' Kit includes:

  • One (1) 57 inch track
  • One (1) 48 inch track
  • Two (2) 57 inch length anti-chip strips, installed on track
  • Two (2) 48 inch length anti-chip strips, installed on track
  • One (1) Universal Saw Adapter Plate
  • One (1) Hardware packet (6 bolts, 6 nuts, L-shaped hex wrench)
  • One (1) Setup Jig
  • Two (2) dovetail connectors, with setscrews installed
  • One (1) Anti-Chip carrier
  • Two (2) 6 inch length anti-chip strips, for carrier
  • Hard copy of installation instructions


Ships by UPS only. Oversized shipping charges apply on these product.

TRUE TRAC™ TRACK SAW SYSTEM

TRUE TRAC™ TRACK SAW SYSTEM

£154.00

QUESTIONS & ANSWERS

Ask a Question
  • If I buy the 4 ft kit can i buy the extra parts at a later time and what would it cost me to buy a 57 in extension & connectors and the rubber inserts

    If you start out with the 570TPC 4' Kit, you can always add the 480TCC Extension Kit at any time in the future, or even add two or more extensions to make it as long as you need. The system was designed to be adaptable.

Customer Reviews

Based on 5 reviews
60%
(3)
20%
(1)
20%
(1)
0%
(0)
0%
(0)
A
Anonymous
Trump Trac saw system (8')

Awesome system. Best price on the internet from Woodline USA. Will be my go go store when shopping for woodworking tools.

A
Anonymous
TrueTrac

Work like it is ment to do,cut a straight edge on large sheet goods. Would I recommend TrueTrac , you bet I would, but it is kind a little over priced.,

D
Danny F.
First time buyer

Overall experience was ok. I'm spoiled by Amazon in getting 98%of my orders in two days. Woodline was prompt in replying to my inquiry and were thorough in providing tracking info. But it took about two weeks to receive my order. That is not the end of the world, just different than what I'm used to. That said, I would order from them again.

As they say, timing is everything and unfortunately you were caught in the Bermuda Triangle of our extended weekend. We apologize for the delay and we hope that in the future you will give us the opportunity to prove that we are not normally inefficient.

A
Anonymous
True Trac

I like the trac and it has made my life much easier. Jack

J
JOHN S.
true trac saw system

good product I suggest you tell readers there is some drilling required there are people who will not look at the video. also why not put a couple of extra 5/32 bolts and nuts in the pkg the bolts are hard to find,


Share this Product


More from this collection

Woodline manufactures and sells only quality carbide tipped and solid carbide router bits backed by a LIFETIME WARRANTY.

Need a gift idea for your favorite woodworker?

Gift Cards from Woodline are perfect!

Woodline Gift Card

GET OUR LATEST CATALOG: