RC-49360 Insert Superabbet™ 2″ Dia, 30mm Cut Length, 5/8″ & 3/4″ Depth, 1/2″ Shank Amana
67800 21pc Collar Set for Insert Superabbet™ Flush to 18mm Depth Amana
67500 6pc Collar Set for Insert Superabbet™ 1/16″ to 1/2″ Depth Amana
67600 5pc Collar Set for Insert Superabbet™ 3/16″ - 11/16″ Depth Amana
RC-49355 Insert Superabbet JR™ 1-1/2″ Dia, 12mm Cut Length, 1/2″ Depth, 1/2″ Shank Amana
67355 17pc Collar Set for Insert Superabbet JR™ 15/16″ - Flush Depth Amana
67350 5pc Collar Set for Insert Superabbet JR™ 3/8″ - Flush Depth Amana
RC-49360 Insert Superabbet™ 2″ Dia, 30mm Cut Length, 5/8″ & 3/4″ Depth, 1/2″ Shank Amana
67800 21pc Collar Set for Insert Superabbet™ Flush to 18mm Depth Amana
67500 6pc Collar Set for Insert Superabbet™ 1/16″ to 1/2″ Depth Amana
67600 5pc Collar Set for Insert Superabbet™ 3/16″ - 11/16″ Depth Amana
RC-49355 Insert Superabbet JR™ 1-1/2″ Dia, 12mm Cut Length, 1/2″ Depth, 1/2″ Shank Amana
67355 17pc Collar Set for Insert Superabbet JR™ 15/16″ - Flush Depth Amana
67350 5pc Collar Set for Insert Superabbet JR™ 3/8″ - Flush Depth Amana

INSERT CARBIDE RABBET ROUTER BITS

Bearings may be changed to produce a wide range of cutting depths.  Inserts are either two or four-sided for a great value .

RC-49360:This ingenious tool features both interchangeable cutting edges and an interchangeable guide collar, enabling you to cut a wide range of rabbets. Changing the collars on the twin ball-bearing guide steps the cut width in 1/16" increments from flush through 3/4" with five extra "plywood" sizes.

Between the standard and optional collars, there are 18 different rabbet sizes available. The deep guide collar design adds stability to the tool for hand-held router operations. The basic 2"-diameter bit includes a hex key, instructions, and all necessary parts for 5/8" and 3/4" width rabbets. The "RC" version has extra-long double-edged carbide inserts which enables the bit to cut 30mm high. Inserts can be rotated or replaced without removing the bit from the router. Replacement knives are part # RCK-30.

RC-49355: A scaled-down version of the Superabbet™, this tool features four-sided replaceable carbide knives and a reduced cut depth capacity. It uses the same twin ball-bearing guide collar assortment to produce the same extensive range of precise rabbet widths. The standard tool is supplied with a collar for 1/2" rabbet width. Optional collars are available individually and in five-piece and 17-piece kits. Replacement knives are part # AMA-12.

£40 - £167 £223
/

Select an option to add this to your cart.

RC-49360 Insert Superabbet™ 2″ Dia, 30mm Cut Length, 5/8″ & 3/4″ Depth, 1/2″ Shank Amana
INSERT CARBIDE RABBET ROUTER BITS
£40 - £167
£52 - £223
RC-49360 Insert Superabbet™ 2″ Dia, 30mm Cut Length, 5/8″ & 3/4″ Depth, 1/2″ Shank Amana
RC-49360 Insert Superabbet™ 2″ Dia, 30mm Cut Length, 5/8″ & 3/4″ Depth, 1/2″ Shank Amana RC-49360
£167 /each
67800 21pc Collar Set for Insert Superabbet™ Flush to 18mm Depth Amana
67800 21pc Collar Set for Insert Superabbet™ Flush to 18mm Depth Amana 67800
£127 /each
67500 6pc Collar Set for Insert Superabbet™ 1/16″ to 1/2″ Depth Amana
67500 6pc Collar Set for Insert Superabbet™ 1/16″ to 1/2″ Depth Amana 67500
£44 /each
67600 5pc Collar Set for Insert Superabbet™ 3/16″ - 11/16″ Depth Amana
67600 5pc Collar Set for Insert Superabbet™ 3/16″ - 11/16″ Depth Amana 67600
£44 /each
RC-49355 Insert Superabbet JR™ 1-1/2″ Dia, 12mm Cut Length, 1/2″ Depth, 1/2″ Shank Amana
RC-49355 Insert Superabbet JR™ 1-1/2″ Dia, 12mm Cut Length, 1/2″ Depth, 1/2″ Shank Amana RC-49355
£110 /each
67355 17pc Collar Set for Insert Superabbet JR™ 15/16″ - Flush Depth Amana
67355 17pc Collar Set for Insert Superabbet JR™ 15/16″ - Flush Depth Amana 67355
£95 /each
67350 5pc Collar Set for Insert Superabbet JR™ 3/8″ - Flush Depth Amana
67350 5pc Collar Set for Insert Superabbet JR™ 3/8″ - Flush Depth Amana 67350
£40 /each
Total:

Questions & Answers

Have a Question?

Ask a Question

  • can i rabbet perpose used 12mm depth and 32mm streight.

    Not in one cut.  The cutter is only 30mm Kerf(Long) and you need a 1-1/16 bearing which comes in the 21 pc set of bearings to get a cutting depth of 12mm.

You may also like

Recently viewed