Produce rail and stile door frames for cabinet doors. These bits don't need to be taken apart, reversed, or have parts swapped, just raise and lower bit in your router table to change cuts. Or make it even easier by using a 3/8″ thick sled to raise the material to the correct height for a perfect match. Rail end is cut face up and edge is cut face down. For 3/4″ material.
- 1-7/16″ Cut Length
- 1-5/8″ Diameter (exc. 891.521.11)
- 1/4″ x 3/8″ Slot (exc. WL-1365-5.5)
- 7/16″ x 3/8″ Profile